OHAUS T72XW AM Скачать руководство пользователя страница 106

Страница: 106 / 143

EN 98

7000 SERIES INDICATORS

Figure 5-7: Inserting the SD Memory Card

2. Apply power, enter setup and access the backup procedure at Maintenance > Backup to SD.

3. At the Dataset Name parameter, press

ENTER

to program the saved file name. The file will be

namedT72XW_nn where “nn” can be a number between 01 and 99. Enter the desired file number then
press

ENTER

4. Focus will move to the Start prompt on the display. Press

ENTER

to begin the backup or press the

LEFT

navigation key to exit without saving.

5. After pressing

ENTER

, the indicator will indicate

“Working. Please wait.” during the backup and “Backup

complete

” when the backup procedure is finished.

6. Press

ENTER

to acknowledge the Backup complete message then exit setup.

5.4.2 Restore from SD Memory Card

After the setup parameters have been stored onto the SD memory card, they can be restored to the indicator when
needed by following this procedure.



After a restore is performed, the system will automatically restart.

1. Remove power from the indicator and insert the SD memory card if not already installed.

Refer to Figure 5-7 for location of SD memory card.

2. Apply power, enter setup and access the restore procedure at Maintenance > Restore from SD.

3. At the Dataset Name parameter, select the name of the saved file to be restored. Only files with the name

T72XW_nn.txt in the T72XWBKUP folder will be shown in the selection box.

4. Next, select the type of information to be restored to the indicator. Either the Configuration and Calibration

can be restored or the Configuration only.

5. Focus will move to the Start prompt on the display. Press

ENTER

to begin the restore process or press the

LEFT

navigation key to exit without restoring.

6. After pressing

ENTER

, the indicator will indicate

“Working. Please wait.” during the backup and “Restore

complete.

” when the restore procedure is finished.

5.5

Master Reset

A hardware master reset restores all indicator setup parameters to the factory default settings and deletes all tables
and log files (refer to Appendix B, Parameter Values).



Be sure to make a backup of data before performing a master reset.

The master reset typically is performed under these circumstances:

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание T72XW AM
















































































































































Результаты поиска

Содержание T72XW AM

Отзывы:

Бренды по названию

Популярные бренды

OHAUS T72XW AM, Инструкция по эксплуатации

Результаты поиска

Содержание T72XW AM

Отзывы:

Бренды по названию

Популярные бренды