OHAUS T72XW AM, Инструкция по эксплуатации

Страница: 68 / 143

EN 60 7000 SERIES INDICATORS
3. Use the DOWN navigation key to move the focus to the second page of the Scale menu, so that the Reset
branch (shortcut 10) is displayed. Alternately, press the UP navigation key once to proceed to the end of
the second page.
Figure 3-20: Sub-branches for Indicator Branch of Setup
4. Use the DOWN navigation key to select Reset, then press ENTER . The screen shows a warning message
about resetting the Scale setup (Figure 3-21).
Figure 3-21: Indicator Reset Warning Screen
5. Press the ENTER key to reset the Scale setup values to factory default settings.
6. A status message appears that verifies a successful reset.
7. Press the LEFT navigation key to return to the setup menu display.
8. This same procedure can be used to reset factory default settings for any major branch in setup.
Select Reset All under Maintenance (Figure 3-22) to restore all setup settings to factory defaults. Note that
neither this, nor Scale Reset, includes the reset of type, capacity, increment, or calibration data. Only a Master
Reset will reset these parameters to factory default values. A Master Reset should only be performed by a
trained OHAUS CORPORATION service technician.
Figure 3-22: Reset All Setup Blocks
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com