OHAUS T72XW AM, Инструкция по эксплуатации

Страница: 88 / 143

EN 80 7000 SERIES INDICATORS
To change the mode from APW entry to Sampling:
1. When the display is prompting APW?, press the MENU key to access the Operator Menu.
2. Select the Sample/APW key or and press ENTER .
3. The prompt will now show SAMPLE? and support part sampling to determine an APW.
Clearing the Counting Cycle
When the display is showing the number of pieces in a piece count, the display can be cleared back to the
prompting sequence by pressing the CLEAR key
twice. The first press of the
CLEAR key
will clear
the tare value and the second press will clear the APW value and return the display to either the Tare? Or Sample?
prompt, depending on the operating sequence selected.
Recall of Stored IDs
An ID Table can be enabled in setup to store up to 99 IDs. This is useful if the APW of the part being counted and
the tare weight are consistent. Use of the stored values eliminates the taring and sampling process and shows the
piece count immediately.
Each part ID is identified by a one- or two-digit ID number, and includes a description, tare weight, APW and (if so
configured in setup) an accumulator and counter.
An ID Table record can be recalled by one of two methods:

If the ID is not known, the record can be found by viewing the ID Table.

If the ID is known, it can be entered in a Quick Recall sequence.
Recall from ID Table
To recall a record from the ID Table:
1. Press the MENU key to access the Operator Menu.
2. Select ID Table and press ENTER .
3.
The first ID record will be displayed, with a scroll bar to the right.
4. Use the UP and DOWN navigation keys to move the view until the desired record is displayed:
a) Press ENTER to select the record and return to the counting application
b) Press the LEFT arrow to return to the counting application without selecting a record.
Quick ID Recall
When the display is in piece-counting mode, a known ID can be recalled directly:
1.
Use the numeric keypad to enter the ID.A Data: label will display on line 1 of the display, and the entered
number on line 2.
2. Once the ID has been entered, press ID to perform the recall.
3. If the ID is not found in the ID Table, an error message will appear.Clear the message by pressing ENTER
The display will return to the counting mode, using the previous APW value.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com