OHAUS T72XW AM, Инструкция по эксплуатации

Страница: 87 / 143

7000 SERIES INDICATORS EN 79
11. Remove the container from the scale and the display will show a piece count equivalent to the tare weight.
12. If counting the same pieces again, place an empty container on the scale and press TARE to tare to
net zero. Additional pieces added to the container will be shown.
Count Out Sequence
The T72XW Counting application can be used to count out pieces from a container placed on the scale. This
function varies depending on the mode in use.
Tare-Sample
1. At the Tare? prompt, place the entire container on the scale and press ENTER .
2. At the Sample? prompt, remove the sample quantity from the container and press ENTER .
3. The indicator will display a negative count equal to the sample quantity. As additional pieces are removed the
count will update in a negative direction.
APW
1.
If in the Tare-Sample sequence and the display is prompting APW?:
2. Enter the APW of the part and press ENTER .
3. The indicator will display a count of zero pieces.
4. As pieces are removed the count will update in a negative direction.
Sample-Tare
1. Place the sample pieces on the empty scale and press ENTER .
2. At the Tare? prompt, place the full container on the scale and press ENTER .
3. The indicator will display a count of zero pieces.
4. As pieces are removed from the container, the count will update in a negative direction.
Counting a Full Container
Parts in a full container can be counted when the indicator is in Sample-Tare mode.
1.
Take the sample as normal.
2. At the Tare? prompt, use the numeric keypad to enter the preset tare value of the container and press ENTER
.
3. Place the full container on the scale. The count will update to show the total number of pieces.
Switching from Sample to APW Entry Mode
The normal sampling sequence requires taking a sample to determine the APW value for the part. If the APW is
already known, it can be entered directly by changing the entry mode from sampling to APW entry.

The mode switching icon ( or ) must be enabled in setup (at Application > Counting > Menu Keys)
in order to appear on the Operator Menu.

When the indicator
’s display language is set to English, the
icon will appear. If any other language is
set, will appear.
To change the mode from Sampling to APW entry:
1. When the display is prompting Sample?, press the MENU key to access the Operator Menu.
2. Select Sample/APW key or and press ENTER .
3.
The prompt will now show APW? and support direct entry of an APW.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com