EN 78
7000 SERIES INDICATORS
The following keys can be used when creating a new ID record:
LEFT
arrow
Return to ID Table view.
UP and
DOWN arrows
Navigates between the labels on the setup page.
ENTER
Confirm entry and move to next parameter.
4.4.4
Operating Sequences
The following sections describe operation of the counting application.
Tare
– Sample Sequence
Begin with the scale empty and the indicator in the Counting application.
1.
The display will prompt Tare? Press
ENTER
.
2.
Press ZERO
to capture an accurate zero reference.
3.
Place the empty container for the parts to be counted on the scale and press the
ENTER
key
. If no
container will be used, simply press
ENTER
with nothing on the scale.
4.
The weight of the container will be subtracted and the display will indicate a zero net weight. The display will
prompt Sample? Press
ENTER
. with a Sample = xx entry box below.
5.
Add the desired number of sample pieces to the scale.
6.
If the displayed sample quantity is correct, press the
ENTER
key
to start the sampling cycle. If the sample
quantity is not correct, use the numeric keypad to enter the correct sample quantity and then press the
ENTER
key
.
7.
The main display will change from showing weight to showing the piece count. As additional pieces are added
to the scale, the count will increment. Place all pieces to be counted onto the scale.
8.
Press PRINT
to print the resulting count. If Auto Print is enabled, the indicator will automatically trigger a
demand output when it determines a no-motion condition.
9.
Remove the container from the scale and the display will show a piece count equivalent to the tare weight.
10. If counting the same pieces again, place an empty container on the scale and press
TARE
to tare to
net zero. Additional pieces added to the container will be shown.
Sample
– Tare Sequence
Begin with the scale empty and the indicator in the Counting application.
1.
The display will prompt Sample? Press
ENTER
. with a Sample = xx entry box below.
2.
Press ZERO
to capture an accurate zero reference.
3.
Add the desired number of sample pieces to the scale.
4.
If the displayed sample quantity is correct, press the
ENTER
key
. If the sample quantity is not correct, use
the numeric keypad to enter the correct sample quantity and then press the
ENTER
key
.
5.
The display will prompt Tare? Press
ENTER
. with an entry box below.
6.
Enter the known preset tare value of the container using the numeric keypad and then press the
ENTER
key
. If the tare weight of the container is not known, simply press
ENTER
and the tare will be entered later
in the sequence.
7.
The display will now show the piece count.
8.
In the case that the container tare value was not known and was not entered as a preset tare in step 6 above,
remove any sample pieces from the scale and place the empty container on the scale. Press the
TARE
key
to tare the container. The display will now show zero pieces.
9.
As additional pieces are added to the scale, the count will increment. Place all pieces to be counted onto the
scale.
10. Press PRINT
to print the resulting count. If Auto Print is enabled, the indicator will automatically trigger a
demand output when it determines a no-motion condition.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
Содержание T72XW AM
