OHAUS T72XW AM, Инструкция по эксплуатации

Страница: 24 / 143

EN 16 7000 SERIES INDICATORS

The ZERO and TARE functions will not operate when there is motion on the scale. If one of these keys is
pressed while the scale is in motion, the command will be retained for the programmed number of seconds
while the indicator waits for no-motion. If a no-motion condition is not detected within the timeout period, the
request is cancelled and discarded.
Navigation Keys
The navigation keys are used for changing focus between on-screen items, for confirming a selection, and to
initiate a demand output.
Table 2-4: Navigation Keys
ARROW
KEYS Move focus, or the cursor, in the direction indicated.
When the display is in the menu mode, and the left-most
item is selected, the
LEFT arrow will return to the
previous screen.
PRINT/ ENTER Press the PRINT/ ENTER key in the Navigation Keypad to
accept the item or selection in focus and move to the next
display.
2.3 Operator Menu
There are a few functions that operators typically perform which are available in a top-level menu system in the
T72XW indicator. These include access to Alibi Memory, setting time and date, adjusting contrast, viewing and
resetting the transaction counter, viewing and clearing totals, expanding the displayed weight resolution by 10, and
recalling information. An explanation of how to access these functions follows.
2.3.1 Language Selection
Depending on the indicator
’s language setup (at Indicator > Region > Language), parameter labels in the operator
menu will appear as words.
2.3.2 Menu Navigation
To access the operator menu, press the MENU key . The display will change from showing the normal weigh
display to an array of icons (Figure 2-3). The icons included depend on the indicator
’s configuration.
Figure 2-2: Operator Menu Display
Items in this menu can be selected directly by pressing the corresponding number on the alphanumeric keypad, or
by using the arrow keys to move focus up, down, left and right and then pressing ENTER .

When focus is in the left column, as in Figure 2-3 and Figure 2-4, pressing the LEFT arrow key will exit the
SETUP menu and display the OPERATOR menu.
Accessing Operator Screens
For instance, from the screen shown in Figure 2-3, pressing
ENTER or pressing 4 displays the Time & Date setup
screen.
Icon in focus
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com