Oce im5530, Руководство по печати

Страница: 253 / 414

Setting Up Print Options 251
- 32K on 16K — Select this to print a 32K size booklet. Every 2 pages are printed on 16K
paper to fit on half a sheet.
- 16K on 8K — Select this to print a 16K size booklet. Every 2 pages are printed on 8K
paper to fit on half a sheet.
2) Center Margin
This sets the gutter on the center of two sided page. You can enter up to 0.500 inch (12.700
mm). The printed images will be reduced according to the margin setting.
3) Outer Margin
This sets the gutter on the right side and left side on the paper. You can enter up to 1.00 inch
(25.40 mm). The printed images will be reduced according to the margin setting.
4) Units
Select the unit for the Center Margin and Outer Margin option. The default unit varies
depending on the regional setting in the Windows.
5) Staple Down the Center
Check this to staple double in the center.
“Staple Down the Center” is available only when “A5 on A4”, “A4 on A3”, “B5 on B4”, “Letter
- Half on Letter”, “LT on LD”, “1/2 LG on LG”, or “16K on 8K” is selected at the Output Docu-
ment Layout drop down box and the Saddle Stitch Finisher is installed.
6) Number Pages from Right to Left
Check this to print a booklet that can be read from right to left.
7) Use Front Cover
This sets front cover printing for a booklet which allows you to insert or print a cover on a
sheet fed from a different tray than the Paper Source option selected on the Setup tab.
To enable cover printing, check on the box and select the location from where a cover sheet
is to be fed and the print style.
Source
Select the location from where a cover sheet is to be fed. When “Automatic” is selected, the
paper is automatically selected according to the printed document size.
The selectable values in the Source drop down box vary depending on the optional devices
installed on this equipment and their configuration on the Configuration tab.
When “Inserter Unit” is selected in the “Source” drop down box, the Inserter Unit Setting dia-
log box appears. In the Inserter Unit Setting dialog box, the following items can be set:
- Print Paper Size —Select the paper size that you set in the Inserter Unit.
- Paper Type —Select the paper type that you set in the Inserter Unit.
- Invert inserted paper —Check this to invert the paper for output. This is useful when
you want to invert the back cover so that the front face of the back cover becomes the
end of the page as the front face of the front cover becomes the first page.