Oce im5530, Руководство по печати

Страница: 349 / 414

Printing from an Application 347
Text Wrapping
The following options control text wrapping when it reaches the right margin.
If this option is not specified the command will not be sent so the printer’s default value will be
used.
Example: The command to specify wrapping is “lp -o wrap
filename ”.
Left Margin
The left margin position can be specified with the following option.
If the left margin is set to the right of the right margin it will be ignored.
If this option is not specified the command will not be sent so the printer’s default value will be
used.
Example: The command to set the left margin to five columns is “lp -o lm=5
filename ”.
Right Margin
The right margin position can be specified with the following option.
If the right margin is set to the left of the left margin or if it is set to a position wider than the logi-
cal page it will be ignored. The right margin is specified in columns from the left margin. A nega-
tive value will be ignored.
If this option is not specified the command will not be sent so the printer’s default value will be
used.
Example: The command to set the right margin to fifty columns is
“lp -o rm=50
filename ”.
Top Margin
The top margin position can be specified with the following option.
If the top margin is set too high or too low part of the text may not appear due to the printer’s
unprintable region. The top margin will be ignored if it is set to a value greater than the printer’s
logical page length. Setting this value may affect the number of lines specified using the page
length option.
Option Value
Alternate
Value
Description
wrap Enable automatic text wrapping.
nowrap Disable automatic text wrapping.
Option Value
Alternate
Value
Description
lm=value Set the left margin to value columns.
Option Value
Alternate
Value
Description
rm=value Set the right margin to value columns.
Option Value
Alternate
Value
Description
tm=value Set the top margin to value lines.