Nitto DURA SI600, Инструкция по эксплуатации

Страница: 87 / 175

SETUP PROCEDURE
3-39
3.3.20 Setting of Print by Pulse Division
Adjust print darkness in response to the temperature change in thermal head.
1
Display the “PULSE DIVISION”
menu under “LABEL SET” (Edit)
mode.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
Move to selection of pulse division and the
option line will be displayed in reverse
video.
3
Turn the dial to display “ENABLE/
DISABLE”.
Pulse-Slicing
Printing
Content
DISABLE Heat the thermal head all together. (The option is selected if both the
compatibility between thermal transfer ribbon and thermal transfer paper as well
as the transferring effect are good.)
ENABLE Heat the thermal head in separated parts. (The option is selected if the
compatibility between thermal transfer ribbon and thermal transfer paper is good
while transferring effect is not satisfactory.)
* If the printing speed is over 100mm/s, it always becomes invalid status.
4
Press the key.
Confirm the applied print configuration and return to selection of setting menu.
Pressthe key
and return to selection
of a setting menu.