Nitto DURA SI600, Инструкция по эксплуатации

Страница: 83 / 175

SETUP PROCEDURE
3-35

Setting of Gap between Page
1
Display “GAP BETWEEN PAGE”.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
Move to setting of gap between page and the
option line will be displayed in reverse video.
3
Turn the dial to display a random
value.
Range for Setting : 0.0mm ~ 100.0mm
4
Press the key.
Confirm the selection of enabling/disabling continuous paper and return to selection of setting options.
3.3.17 Adjustment of Printing Position
Adjust the position of coordinates origin according to command.
1
Display the “PRINTING
POSITION” menu under “LABEL
SET” (Edit) mode.
2
Press the key.
Move to selection of setting options and the
current preset value will be displayed in the
fourth line on the LCD.
3
Turn the dial to display the
options for setting.
Options
for Setting
Content
WIDTH Set the adjustment value for the origin position of coordinates to be horizontally shifted
according to command.
Please read “

Setting of Printing Position (Width)” for detailed operational procedures.
LENGTH Set the adjustment value for the origin position of coordinates to be vertically shifted
according to command.
Please read “

Setting of Printing Position (Length)” for detailed operational
Press the key
to return to selection of
items for setting.
Adjustment of gap
between pages can be
done by the unit of 0.1
mm.
Pressthe key
and return to selection
of a setting menu.