Nitto DURA SI600, Инструкция по эксплуатации

Страница: 69 / 175

SETUP PROCEDURE
3-21
3.3.8 Setting of Label Size
Set Label Size (width, length and pitch between labels).
1
Display the “LABEL SIZE” menu
under “LABEL SET” (Edit) mode.
2
Press the key.
Move to selection of setting options and the
option of “WIDTH” will be displayed in the
fourth line on the LCD.
3
Turn the dial to display the
options for setting.
Option for Setting Content
WIDTH Set the width of label.
Please read the under mentioned “

Set Label Width” for operation procedures.
LENGTH
Set the length of label.
Please read the under mentioned “

Set Label Length” for operation procedures.
PITCH
Set the distance (in pitch) from the front of label to the next label.
Please read the under mentioned “
 Set Label Pitch” for operation procedures.
AUTO LENGTH
MEASURE
Set whether to use the automatically measured value as the length of label when
paper is fed.
Please read the under mentioned “

Enable/Disable Auto Length Measure” for
operation procedures.

Set Label Width.
1
Display “WIDTH”.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
Move to the operation of setting label width
and the width line will be displayed in
reverse video.
3
Turn the dial to display label width.
Range for Setting : 1.0mm ~ 109.0mm
4
Press the key.
Confirm the label width set and return to
selection of options for setting.
Pressthe key
and return to selection
of a setting menu.
Press the key
to return to selection of
items for setting.
Adjustment can be
done by the unit of 0.1
mm.
To set label size, please do
it after confirmation with
sections like “Using Label
with Backing Paper”,
“Using Label with I-
Mark” on Page 3-12 and
“Using Continuous
Paper” on Page 3-13 first.