Nitto DURA SI600, Инструкция по эксплуатации

Страница: 71 / 175

SETUP PROCEDURE
3-23

Set Label Pitch
1
Display “PITCH”.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
Move to the operation of setting label pitch
and the pitch line will be displayed in
reverse video.
3
Turn the dial to display label pitch.
Range for Setting : 1.0mm ~ 400.0mm
4
Press the key.
Confirm the label pitch set and return to selection of options for setting.

Enable/Disable Auto Length Measure
1
Display “AUTO LENGTH
MEASURE”.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
Move to the operation of setting auto length
measure and the length line will be
displayed in reverse video.
3
Turn the dial to display “ENABLE/
DISABLE”.
Auto Length
Measure
Content
DISABLE
Manually input a value as the length of label and auto length measure does not
take effects.
ENABLE
Set whether to use the Auto Length Measure value automatically measured by
pitch sensor (label sensor) as label length.
4
Press the key.
Confirm the setting of Auto Length Measure and return to selection of options for setting.
When Auto Length Measure is enabled, press the
key and the Auto Length Measure value
will become label length when paper is fed.
Press the key
to return to selection of
items for setting.
Adjustment can be
done by the unit of 0.1
mm.
Press the key
to return to selection of
items for setting.