Nitto DURA SI600, Инструкция по эксплуатации

Страница: 81 / 175

SETUP PROCEDURE
3-33
3.3.16 Setting of Continuous Paper
Set permission for using continuous paper as well as adjust the value related to paper feeding
operations during using continuous paper.
Continuous paper makes the function possible that during actual printing part of the print data
can be printed on one page and the printer stops and starts printing from the beginning of the next
page.
When continuous paper is “enabled”, label position is not detected and the printer will be
configured the same as in the case when menu “1-9 Pitch Sensor” is “disabled”.
1
Display the “CONTINUOUS
PAPER” menu under “LABEL
SET” (Edit) mode.
2
Press the key.
Move to selection of setting options and the
current preset value will be displayed in the
fourth line on the LCD.
3
Turn the dial to display the items
for setting.
* If “DISABLE” is displayed in the fourth line on the LCD, only option “Continuous Paper”
can be displayed/selected.
Option for Setting Content
CONTINUOUS
PAPER Set whether to use continuous paper for current print configuration.
Please read under mentioned “

Selection of Print Media” for detailed
operational procedures.
GAP BETWEEN
PAGE Set the gap between current print and the next print.
Please read under mentioned “

Setting of Gap between Page” for detailed
operational procedures.
Pressthe key
and return to selection
of a setting menu.