Nitto DURA SI600, Инструкция по эксплуатации

Страница: 47 / 175

BASIC OPERATIONS
2-11
Stand-Alone Printing
Use CF card in which printing data is saved and the printer can complete stand-alone printing.
Only when CF card slot (option) is installed and stand-alone printing is enabled, the operation
can be completed.
Please read “3.4.12 Setting of Stand-Alone” on page 3-53 for details about the settings of this
function.
1
Press on the [

] side of the
Power Switch and power is
turned OFF.
Power lamp goes out, and the power source
is disconnected.
2
Insert the CF card, in which
printing instruction data is saved,
into the CF card slot on the rear
of the printer.
3
Press on the [
｜
] side of the
Power Switch and power is
turned ON.
Power lamp lights up and the printer is
started under offline status.
4
Press the key.
The printer is switch online. It will read the
printing instruction data in the CF card and
start printing.
When printing is finished, the printer will
be switched offline automatically.
Please turn OFF
power before inserting
or pulling out the CF
card.
Press the key
after printing is finished,
the printer will be
switched online and
reprinting of the data can
be done.