Nikon HQA46480, Инструкция по эксплуатации

Страница: 80 / 185

4 Applications
66 Total Station DTM-322 Instruction Manual
RefLine S-O
This function allows you to stake out a point based on the Sta, O/S, and dZ to a
specified line.
1. Press
[4]
or select
RefLine S-O
in the Stakeout
menu.
2. Enter the first point (P1) of the line.
3. Enter the second point (P2) of the line.
4. Enter offsets to the line.
Press
[ENT]
in a blank field to enter the value
0.0000.
5. Rotate the instrument until the dHA is close to
0°00'00".
6. Sight the target and press
[MSR1]
or
[MSR2]
.
When a distance measurement is taken, the
difference from the design point appears.
7. To record the point as an SO record, press [ENT] .
If you press
[ENT]
without entering a PT name, you can enter temporary
coordinates which are not recorded in the job.
Alternatively, press the
MSR
softkey to measure a point.
Sta Distance from P1 along the line
O/S Distance perpendicular to the line
(+) Right side of the P1-P2 line
(-) Left side of the P1-P2 line
dZ Difference in height from the line