NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 57 / 330

4.2 Screen Configuration and Operation
WF1967/WF1968
4-7

Mode display section
Displays the oscillation mode and the channel mode (WF1968 only) of this product.
• Oscillation mode
The current oscillation mode is displayed.
CONT (continuous oscillation)/MODU (modulated oscillation)/
SWEEP (sweep oscillation)/BURST (burst oscillation)
For details on the oscillation mode setting see

P.4-27
• Channel mode (WF1968 only)
The current channel mode is displayed.
INDEP (independent)/2PHASE (2-phase)/
2TONE (constant frequency difference)/RATIO (constant frequency ratio)/
DIFF(differential output)/DIFF2(voltage doubler output)
For details on the channel mode setting see

P.8-2

Setting area
This area is used to display and set the various parameters.
When multiple display formats can be selected, the display format switching tabs are displayed on
the left side of the screen.

P.4-8
If the setting screen has multiple pages, use the
Next soft-key to change pages.
If there are multiple setting screens, an icon at
the top center of the screen will indicate the
currently displayed page.
In the example on the left, there are two setting
screens and the second page is currently
displayed.

Soft-key display area
This area displays the functions of the soft-keys which are allocated according to the situation.
If six or more soft-
keys are allocated, “▼ n/m” is displayed on the right-most soft-key. This
indicates that the set of soft-keys belonging to the current setting screen consists of m stages in
total, and that the set for the nth stage is currently displayed. When you press this right-most key,
the soft-key set for the next stage is displayed.
NEXT key for switching the
setting screen pages
Indicates that the first of
two
stages of soft-keys are
displayed.
When this key is pressed,
the soft-keys for the next
stage are displayed.
Oscillation Mode
Channel mode
(WF1968 only)
Setting screen page
position display icon