NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 203 / 330

7.7 To Use the Saved Arbitrary Waveform
WF1967/WF1968 7-11
7.7.2 To Retrieve From USB Flash Memory
The screens for retrieving from USB flash memory are split into two pages. One screen specifies the
retrieval source (files in USB flash memory) and the other the retrieval destination (edit memory or
internal arbitrary waveform memory).
Press the Next soft-key to change screens. The currently displayed screen is indicated by the icon at the
top center of the screen.
a) To select the retrieval source
This screen allows you to specify the file to be retrieved as well as change the current folder.
Pressing the [OK] soft-key while a file is selected retrieves the arbitrary waveform from the
specified file and copies it to the edit memory or internal arbitrary waveform memory as
specified on the next page.
Pressing the [Enter] soft-key while selecting a folder sets the current folder to the specified folder
(or "../" for the folder above).
b) To select the retrieval destination
Select number 0 to copy to the edit memory. All other numbers specify an arbitrary waveform
memory location on the device as the copy destination. Press the [OK] soft-key to copy the
arbitrary waveform in the USB flash memory selected on the previous page to the specified
destination. If the copy destination is the internal arbitrary waveform memory then the name will
be the file name in USB flash memory.
If the selected internal arbitrary waveform memory is not <Empty>, then the file name may be
changed with the [Rename] soft-key.
Select the USB tab when read from USB flash memory.
Select source
Select destination
It indicates first page.
When you select an internal memory is not an Empty
appears [Rename] soft key area, you can change the name.
Select destination
It indicates second page.