NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 155 / 330

4.9 Setting and Operation of Burst
WF1967/WF1968 4-105
j) How to use stop level
The level while oscillation is stopped is usually set by oscillation start/stop phase. It is also possible
to set by the ratio to the full scale of the amplitude independently.
Set the stop level [StpLvl] as On [On] on the second page of the setting screen, and set the level
with % value.

P.4-97
k) Triggered gate oscillation of noise
Because noise has no cycle, the gate On zone is the oscillation zone, and the gate Off zone is the
oscillation zone. In addition, because noise has no phase, a stop level setting is very effective.

P.4-101