NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 249 / 330

11.6 Using the Saved Sequence
WF1967/WF1968 11-19
11.6 Using the Saved Sequence
11.6.1 Recalling from the Built-In Memory
1.
Press the [Recall] soft-key in the [Edit] status to
switch to the screen for recalling the saved
sequence.
2.
Select Internal tab at the left bottom side of the
screen and press the ENTER key to switch the
recalling source.
3.
Select a desired memory number from 1 to 10
and press the [OK] soft key. The contents are
read from built in memory.
4.
To rename the sequence, press the [Rename]
soft key in this screen.
11.6.2 Recalling from the USB Flash Memory
USB interface in use, USB memory cannot be used.
1.
Press the [Recall] soft-key in the [Edit] status
to switch to the screen for recalling the saved
sequence.
2.
Select USB tab at the left bottom side of the
screen and press the ENTER key to switch the
recalling source.
3.
Press the [OK] soft key when you have
selected the file, and Reads the sequence from
the specified file.
4.
Folder is marked with "/" to the end of the
name. When you press the [Enter] soft key
when you have selected the folder, and then
move to the specified folder (the folder up one
in the selection of the "../").
To read source in the built-in memory, press the
ENTER key to select the Internal tab.
Select memory number
Use when you want to
change the sequence name
To read source to USB memory, press the
ENTER key to select [USB] tab
Select memory number
Use when you want to
change the sequence name