NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 243 / 330

11.4 Setting and Operation Procedure
WF1967/WF1968 11-13
11.4 Setting and Operation Procedure
a) Switching to sequence oscillation mode
1.
Press the MENU key to open the top menu window. Then
select [Sequence] and press the ENTER key.
2.
The dialog box to confirm the move to the sequence
oscillation mode is displayed. Select [OK] and press the
ENTER key. This will move to the sequence oscillation
mode.
The sequence creating/editing window is displayed with the
output setting for Step 0.
b) Creating/editing a sequence
To use a sequence which is already saved, press the [Recall] soft-key and select the sequence to be
used.
To create a new sequence, perform the setting step by step.
To use the existing setting contents, copy and paste either the entire setting of step control
parameters and intra-step channel parameters or the intra-step channel parameters only (using the
soft key).
During editing, the contents of the selected step are output.
In the sequence creating/editing screen, [Edit] is displayed at the top right corner of the screen. The
soft key items in the sequence creating/editing screen are as follows:
Soft keys in [Edit] status
First row
Step parameters (both step control parameters and intra-step channel parameters) corresponding
to the step number currently displayed can be copied and pasted, or the step itself can be cut and
inserted. Even when a step is cut and inserted, the step numbers referenced in each step (jump
destination and branch destination) are not changed.
Second row (Text screen or Single and Dual screens of WF1968)
Step numbers are increased and decreased by using [Step +1] and [Step –1].
Intra-step channel parameters corresponding to the step number currently displayed can be copied
and pasted by using [CH Copy] and [CH Paste]. In WF1968, these soft keys function on the
It is displayed with the Edit
in creating and editing
screen.
There are three rows
of soft-keys
It indicates first row
It indicates second row
In the top menu, select
[Sequence] and then press
the ENTER key