NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 159 / 330

5.1 Procedure to Save Settings
WF1967/WF1968 5-3
5.1.2 To save to USB flash memory
When USB interface is used, USB memory is not available.
1.
When the MENU key is pressed, the top menu
opens. Then, select [Store Settings]. This opens
the Store Settings screen.
2.
When saving to USB, first connect the USB flash
memory to the unit, then select the USB tab on the
far left of the screen and press the ENTER key.
In the Store Settings screen, select the [USB Disk
File No.] field on the top left of the screen, and then
press the ENTER key to open the input field of the
setting memory number to be saved.
Use the up/down arrow keys or the modify knob to
increment or decrement the setting memory
number.
In the left side of the screen, the specified setting
memory number and its setting name are
highlighted. The overview of the setting saved in
the specified setting memory number is displayed
on the right side of the screen.
When folder (in the last of the name a thing with
"/") is selected and pushed Enter soft key, move to
the folder.
3.
If you are newly saved, select the last number in
the [USB Disk File No.]. Press the [Store] soft key.
Then enter the file name and press the [OK] soft
key to save.
When you chose an existing number, or when you
specify a file name that already exists, it opens a
dialog box to confirm overwrite.
If you wish to save, select [OK], and then press the
ENTER key.
In the top menu,
Select [Store Settings].
Select USB tab and press
the ENTER key.