NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 92 / 330

4.4 Setting for Main Items
WF1967/WF1968
4-42
4.4.14 To Add External Signal
It is possible to output by adding an external signal to a waveform output.
a) To Connect addition signal
Connect an addition signal to the external modulation/addition input (MOD/ADD IN) BNC
terminal on the front panel of the WF1967 or on the rear panel of the WF1968.
For the input characteristic,

P.3-10.
This BNC terminal is insulated from the chassis, and the same ground electrical potential as the
waveform output of the identical channel. For the floating ground connection,

P.3-18
b) To activate an addition signal
Ext Add is set in the Utility.
1.
When the MENU key is pressed, the
top menu opens. Then, press the
soft-key corresponding to [UTILITY].
This opens the Utility.
2.
On the Utility screen, select the [Ext
Add] field and then press the Enter
key.
On the Utility screen,
select [Ext Add] and then
press the ENTER key
Addition signal
CH1 addition signal
CH2 addition signal
WF1967
WF1968