NF WAVE FACTORY WF1967, Инструкция по эксплуатации

Страница: 58 / 330

4.2 Screen Configuration and Operation
WF1967/WF1968
4-8
4.2.2 Switching Display Format with Tabs (To Display Waveform Graph)
When multiple display formats can be selected, the display format switching tabs are displayed on the
left side of the screen. For example, if the [Graph] tab screen is displayed, you can set the parameters
while checking the image of the output waveform.
a) Display format types
The following three types of display formats are provided on the Oscillator screen.

Text display [Text] (WF1967 )
or [Single] (WF1968)
Displays the settings for one channel
in text format

Graph display [Graph]
Displays the settings for one channel in
both text and graph formats. You can
grasp the image of the output waveform.

2-channel simultaneous display [Dual] (WF1968 only)
The settings of channel 1 and channel 2 in text format are displayed up and down.
The channel to be set can be switched by using the
CH1/CH2 key.