New Holland T6010 DELTA, Руководство оператора

Страница: 187 / 412

SECTION 3 -- FIELD OPERATION
3--53
Observe the implement as it pulls through the soil
and adjust the draft sensitivity knob (1), until the
tendency to raise or lower, due to variations in soil
resistance, is satisfactory. Once set, the tractor
hydraulic system will automatically adjust implement
depth to maintain an even pull (draft load) on the
tractor.
The optimum setting will be achieved by observing
the movement indicator lights (2) and (3). The upper
light (2) will illuminate every time the system raises
the implement as normal draft corrections occur. The
lower light (3) will illuminate as the implement lowers.
91
Turn the draft sensitivity knob (1) slowly clockwise.
The system will respond with smaller, quicker
movements as will be seen by both the indicator
lights flickering. At this point, turn the knob slightly
anti-clockwise until either of the indicator lights
flashes once every 2 or 3 seconds or, as required, to
suit the soil conditions.
Once the required working conditions have been
established there is no need to move the position
control lever again until the work in hand is
completed.
92
Upon reaching the headland, momentarily depress
the top of the raise/lower switch (3) to quickly lift the
implement to the position set by the height limit
control knob. When re-entering the working area,
momentarily depress the lower part of the switch and
the implement will descend at the rate set by the drop
rate control knob and stop when it reaches the depth
set by the draft loading wheel (2).
During the raise cycle, momentarily depressing the
top of the raise/lower switch will pause implement lift.
Depress the top of the switch again to resume the
cycle.
Depressing the lower part of the switch during the
lowering cycle will also pause implement drop.
93