SECTION 4 -- LUBRICATION AND MAINTENANCE
4--73
Cleaning the Exterior of the Tractor
Maintenance of the paintwork is normally carried out
by washing, at intervals that depend on the
conditions of use and the environment. In areas
prone to atmospheric pollution and coastal zones,
washing should be carried out more frequently,
whereas if organic or chemical substances are
present, wash immediately after the tractor is used.
Use a low pressure water spray, sponge down with
a solution of automotive shampoo and water, rinsing
the sponge frequently. Rinse the tractor thoroughly
and dry off.
Avoid washing the tractor if it is hot or has been
standing in the sun. This will help to protect the shine
on the paintwork.
Protect the paintwork by means of periodical
polishing with special products (silicone waxes)
which are available from your authorised dealer. Use
wax polish should the paintwork start to dull as this
has a slightly abrasive action.
NOTE:
When carrying out operations involving
materials or crops which may become airborne,
frequently check the tractor for build up of debris
around the radiator, engine and exhaust system to
prevent overheating or the possibility of catching fire.
In the event of abrasions or deep scratches that
expose the metal under the paintwork, the area
concerned will need to be retouched and treated
immediately with specified original products as
follows:
-- Rub down the immediate area surrounding the
damage with fine abrasive paper.
-- Apply a coat of primer.
-- Leave to dry and then rub down with fine abrasive
paper to ’key’ the surface.
-- Apply the paint. For best results apply several
light applications of paint rather than one heavy
coat. Paint and primer are available from your
authorised dealer.
-- When fully dry, apply a good quality polish and
buff to a shine.
Содержание T6010 DELTA
