SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--16
Adjustable Air Vents
Adjustable air vents are provided throughout the cab
for even distribution of heated or cooled air. Vents are
located each side of the operators seat and on the
instrument
console.
Each
vent
may
be
independently adjusted to direct the air flow (with the
blower control actuated) onto the side windows or the
operator. The two vents located on the upper part of
the instrument console may be adjusted to demist
the windscreen.
To open the circular vents (1) each side of the
instrument console, press one side of the disc and
then turn it, as required, to direct the air flow.
Lift the tag on the rectangular vents to open, and then
adjust for air flow and direction as required.
23
Air Conditioner Switch
(where fitted)
Depress the switch (3), to activate the air conditioner
compressor and lower the temperature of the air
within the cab. The air conditioner will only operate
with the blower (1) switched on.
IMPORTANT:
The air conditioning system uses
R134A refrigerant. Do
not
mix with other refrigerants.
To quickly reduce in cab temperature operate the air
conditioner with the blower speed set to maximum
and the heater control fully off. When the air has
cooled sufficiently, adjust the blower control to
maintain the desired temperature. The windows and
doors should remain closed.
Under certain conditions, it may be desirable to
operate both the air conditioner and heater together,
e.g. to demist the windscreen and interior door glass
on a cold morning. (The air conditioner, as well as
cooling, also removes moisture from the air). Run the
engine to normal operating temperature, turn the
heater temperature control (2) and blower control (1)
to the maximum settings (fully clockwise). Turn on
the air conditioner (3) and adjust the air vents to
direct the air flow, as required.
24
Содержание T6010 DELTA
