SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--86
Shuttle Lever
Selection of forward or reverse travel is by means of
an electrically operated shuttle lever (1), located to
the left of the steering wheel. The lever is
spring-loaded to prevent inadvertent movement, lift
toward the steering wheel before selecting forward or
reverse drive. It is not necessary to depress the
clutch pedal when operating the shuttle lever.
NOTE:
Forward or reverse drive cannot be engaged
unless the operator is in the tractor seat. Additionally,
if the vehicle is moved in either direction with the
handbrake engaged, an audible alarm will be heard
and ’P’ will be displayed in the Dot Matrix and Digital
Gear Displays (where fitted).
NOTE:
To avoid power losses due to internal friction,
place both gearshift lever and the shuttle lever in
neutral when performing stationary operations.
127
To reduce clutch damage caused by shuttle shifting
in too high a gear or at too high a speed, the tractor
will slow using engine braking and the transmission
will then downshift to the lowest gear within the
selected intermediate range before changing
direction.
Shuttle Mode
During normal shuttle operations the same gear is
used for both forward and reverse. However, if 13th
gear or above is selected, the shuttle gear will be 9th.
With Shuttle Mode selected, the electronic control
unit for the transmission is able to memorise shuttle
gear combinations within a range of gears. To
activate Shuttle Mode, carry out the following
procedure.
•
With the key start off, move the shuttle lever to
the reverse position. Depress and hold the
transmission upshift button and turn the key start
on. Do not start the engine.
•
The transmission symbol and DB H3 will appear
in the dot matrix display and the centre LCD will
show ’no’ or ’YES’. Release the upshift button.
•
’no’ indicates memory function is disabled, ’YES’
shows the memory function is activated.
•
Use the upshift and downshift buttons to toggle
between ’no’ and ’YES’. With the appropriate
selection made, turn the key start off and return
the shuttle lever to neutral.
128
Содержание T6010 DELTA
