New Holland T6010 DELTA, Руководство оператора

Страница: 96 / 412

SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--68
Shuttle Lever
The shuttle lever (1) is used to select forward or
reverse travel when any one of the twelve gears is
engaged, provided that the clutch pedal is
depressed. To reverse the direction of travel, reduce
engine and tractor speed to a minimum, depress the
clutch and move the shuttle lever rearwards. Re-
engage the clutch and increase engine speed, as
required.
NOTE: An interlock mechanism prevents movement
of the shuttle lever unless the clutch pedal is
depressed.The starting motor will not operate unless
the shuttle lever is in neutral and the clutch pedal is
depressed.
117
IMPORTANT: Fully depress the clutch pedal when
changing gear. Partially depressing the clutch pedal
when changing gear may result in damage to
transmission components. Also, when changing
down on the move, select the next consecutive gear
in order to avoid damage to the clutch and/or
overspeeding of the engine.
NOTE: When operating in temperatures below --18
°
C
(0
°
F) with cold transmission oil, avoid shuttle
operations, as far as practicable, until the oil has
warmed up.
Creeper Gears (where fitted)
For operations requiring extra low ground speeds,
reduction gear sets (creeper gears) are available.
As the name implies, the reduction gear set has the
effect of reducing all the ratios within the main
transmission to provide an additional twelve gears in
forward and reverse.
Creeper gear selection is denoted by the illumination
of the creeper gear symbol in the instrument panel.
118