New Holland T6010 DELTA, Руководство оператора

Страница: 78 / 412

SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--50
Tractor Ground Speed Display
The lower left--hand LCD provides a permanent
display of ground speed (1) in km/h or MPH
dependent upon the country in which the tractor is to
be used. If required, the display may be changed to
read an alternate ground speed unit from that set at
the factory.
NOTE: If the tractor rear tyre size is changed, the
ground speed display may require re--calibrating to
suit the radius of the new tyre.
NOTE: Illustration shows all displays activated.
89
Changing the Ground Speed Units
Using the CAL/SEL Button
•
With the key--start switch in the OFF position,
depress and hold in the CAL/SEL button (1) and
turn the key-start switch ON. The Km/h MPH
symbols will appear flashing in the display.
Release the button.
•
Press the CAL/SEL button again to toggle between
Km/h and MPH . When the required ground speed
unit is displayed turn off the key--start to store the
selected speed unit in the memory.
90
Using the Enhanced Keypad
(where fitted)
•
With the key--start in the ON position, depress
and hold the Menu/Enter key (2) for 3 seconds.
The DMD will read SETUP MENU , this will
change to CAL after 2 seconds. Using the Menu
Up key (1), scroll through the menu until the
Km/h MPH screen appears.
•
Momentarily depress the Menu/Enter key (2)
and, using the Menu Up/Down keys, select the
required speed reading. To store the setting and
return to the main menu depress the Menu/Enter
key again. Depress the Exit/Cancel key to return
to the original display.
91