SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--89
Driving the Tractor
With the main shift and shuttle levers in neutral,
depress the clutch pedal and start the engine.
NOTE:
A neutral start switch prevents operation of
the starting motor unless the shuttle lever is in neutral
and the clutch pedal is depressed.
For forward travel, with the engine idling, depress the
clutch pedal and move the range lever (1), forward
to the High range or rearward to the Low range, as
required.
When the tractor is initially started and the main shift
lever placed in gear, the electronic control will
automatically select the appropriate powershift ratio
for a smooth pull away, as follows:
134
Gear Lever Positions
Ratio Selected
Field range (Low), 1 to 8
5th. gear
Road range (High), 9 to 16
9th. gear
For forward travel, with the engine idling, pull the
shuttle lever, toward the steering wheel, against light
spring-pressure, and move it up. It is not necessary
to depress the clutch pedal.
IMPORTANT:
To select 14th gear or above, the
tractor must be travelling at a suitable speed before
the higher gears will engage. 14th gear or above
cannot be engaged when the tractor is stationery.
135
Once moving, press the upshift button (1), three
times and gears 6, 7 and 8 will be selected in
sequence. Alternatively, hold the button in and the
transmission will make sequential gear changes at
1.75 second intervals until the button is released or
8th. gear is reached. Use the downshift button (2) in
the same manner to make down shifts.
IMPORTANT:
Downshifts of either one or more
gears, cannot be made if the tractor engine speed is
too high. To downshift, reduce tractor speed (and
therefore engine speed) before attempting to
downshift.
IMPORTANT:
Always use the clutch pedal when
changing between ranges 8th and 9th gears.
NOTE:
When operating in temperatures below --18
°
C (0
°
F) with cold transmission oil, avoid excessive
shuttle operations until the oil has warmed up.
136
Содержание T6010 DELTA
