New Holland T6010 DELTA, Руководство оператора

Страница: 153 / 412

SECTION 3 -- FIELD OPERATION
3--19
TWO--SPEED P.T.O. WITH REVERSIBLE
OUTPUT SHAFT (where fitted)
Tractors with a reversible shaft P.T.O. system will be
supplied with a single output shaft having 6 and 21
splines.
Operating
With the engine running at 1000 rev/min., press the
knob (1) and lift the collar (3) and knob up to engage
the P.T.O. The knob will remain up while the P.T.O.
is engaged and the adjacent warning light (2) will be
illuminated.
IMPORTANT: To avoid shock loads to the P.T.O.,
reduce engine speed to approximately 1000 rev/min
when engaging the P.T.O.
21
Open the throttle to obtain the required engine/P.T.O.
speeds. The P.T.O. speed can be displayed in the
central LCD on the instrument panel (1).
NOTE: The light (2) Figure 21, will be illuminated
when the P.T.O. is engaged. If overspeeding of the
P.T.O. occurs (P.T.O. speed exceeds 630 rev/min)
the light will flash for 5 seconds, then remain steady.
When the 1000 rev/min/shaft is in use, the light may
also flash (but may be ignored) as P.T.O. shaft speed
passes through the 630 rev/min range. The light will
flash again at 1170 P.T.O. rev/min to indicate that
overspeeding has occurred in the 1000 rev/min
P.T.O. range.
Press the knob firmly down to disengage the P.T.O.
22