1
Introduction
This manual is for the NETGEAR Insight Managed WiFi 6 AX5400 Access Point Model
WAX628.
Model WAX628, in this manual referred to as the access point, supports IEEE 802.11ax,
WPA3 WiFi security, six (2+4) streams of WiFi with concurrent operation at 2.4 GHz (2
streams) and 5 GHz (4 streams), and 160 MHz bandwidth at 5 GHz. The combined
throughput is 5400 Mbps: 600 Mbps at 2.4 GHz and 4800 Mbps at 5 GHz.
The access point functions as a Power over Ethernet plus (PoE+) powered device (PD)
in an existing network connected to a PoE+ switch that provides 802.3at power. The
access point also supports a power adapter for connection to a regular switch. Model
WAX628 ships without a power adapter, and model WAX628PA ships
with
a power
adapter. If you ordered model WAX628 but prefer to use the access point without a
PoE+ connection, you can order a power adapter separately.
The PoE+ Ethernet port supports a high speed up to 2.5 Gbps. A second Ethernet LAN
port supports a speed of 1 Gbps for a link aggregation (LAG) connection.
This chapter contains the following sections:
•
•
About the local browser user interface and NETGEAR Insight
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support/.
Note: Firmware updates with new features and bug fixes are made available from time
to time at netgear.com/support/download/. You can check for and download new
firmware manually. If the features or behavior of your product does not match what is
described in this manual, you might need to update the firmware.
Note: In this manual,
WiFi network
means the same as SSID (service set identifier or
WiFi network name) or VAP (virtual access point). That is, when we refer to a WiFi network
we mean an individual SSID or VAP.
8
