manualshive.com logo in svg

NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance, Справочник по аппаратуре

NETGEAR STM150 - Профессиональное устройство управления угрозами в Интернете и почтовыми угрозами. Установочное руководство можно скачать бесплатно с manualshive.com. Подробное описание установки и настройки для безопасной работы сети. Узнайте больше о продукте, загружая руководство.

Поделиться
Скачать
background image

ii

v1.0, September 2009

© 2009 by NETGEAR, Inc. All rights reserved.

Trademarks

NETGEAR and the NETGEAR logo are registered trademarks and ProSecure is a trademark of NETGEAR, Inc. 
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product 
names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to 
make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit 
layout(s) described herein.

Federal Communications Commission (FCC) Compliance Notice: 
Radio Frequency Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by NETGEAR could void the user’s authority to operate the 
equipment.

EU Regulatory Compliance Statement

The ProSecure Web/Email Security Threat Management Appliance STM150, STM300, or STM600 is compliant with 
the following EU Council Directives: 89/336/EEC and LVD 73/23/EEC. Compliance is verified by testing to the 
following standards: EN55022 Class B, EN55024 and EN60950-1.

Bestätigung des Herstellers/Importeurs

Es wird hiermit bestätigt, daß das ProSecure Web/Email Security Threat Management Appliance STM150, STM300, or 
STM600 gemäß der im BMPT-AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das 
vorschriftsmäßige Betreiben einiger Geräte (z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen 
Sie dazu bitte die Anmerkungen in der Betriebsanleitung.

Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt 
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.

Certificate of the Manufacturer/Importer

It is hereby certified that the ProSecure Web/Email Security Threat Management Appliance STM150, STM300, or 
STM600 has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/
1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, 
however, be subject to certain restrictions. Please refer to the notes in the operating instructions. 

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market 
and has been granted the right to test the series for compliance with the regulations. 

DRAFT

Содержание STM150 - ProSecure Web And Email Threat Management Appliance

























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для STM150 - ProSecure Web And Email Threat Management Appliance

Aaeon ICS-6270 User Manual preview
ICS-6270
Бренд: Aaeon Страницы: 104
NETGEAR FVG318v1 - ProSafe 802.11g Wireless VPN Firewall Switch Network Setup Manual preview
FVG318v1 - ProSafe 802.11g Wireless VPN Firewall Switch
Бренд: NETGEAR Страницы: 8
PaloAlto Networks PA-5200 Series Hardware Reference Manual preview
PA-5200 Series
Бренд: PaloAlto Networks Страницы: 8
PaloAlto Networks VM-100 Deployment Manual preview
VM-100
Бренд: PaloAlto Networks Страницы: 72
Dell SonicWALL TZ500 Quick Start Manual preview
SonicWALL TZ500
Бренд: Dell Страницы: 15
D-Link DFL-210 - NetDefend - Security Appliance Log Reference Manual preview
DFL-210 - NetDefend - Security Appliance
Бренд: D-Link Страницы: 476
PaloAlto Networks PA-3200 Series Hardware Reference Manual preview
PA-3200 Series
Бренд: PaloAlto Networks Страницы: 54
Watchguard AP300 Quick Start Manual preview
AP300
Бренд: Watchguard Страницы: 17
Bandura Cyber TIG BT-500 User Manual preview
TIG BT-500
Бренд: Bandura Cyber Страницы: 93
Draytek VIGOR2950 User Manual preview
VIGOR2950
Бренд: Draytek Страницы: 217
3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual preview
H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE
Бренд: 3Com Страницы: 158
Infoblox Infoblox-1852-A Installation Manual preview
Infoblox-1852-A
Бренд: Infoblox Страницы: 20
Infoblox Infoblox-1050-A Installation Manual preview
Infoblox-1050-A
Бренд: Infoblox Страницы: 28
Infoblox Infoblox-550 User Manual preview
Infoblox-550
Бренд: Infoblox Страницы: 40
IOGear BattleHub GFH600BH User Manual preview
BattleHub GFH600BH
Бренд: IOGear Страницы: 2
SonicWALL NSA E6500 Getting Started Manual preview
NSA E6500
Бренд: SonicWALL Страницы: 78

Бренды по названию

Популярные бренды

Загрузить еще бренды