manualshive.com logo in svg

NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance, Справочник по аппаратуре

Поделиться
Скачать
NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Скачать руководство пользователя страница 25

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Introduction

1-9

v1.0, September 2009

Test

On (Amber) during 
startup.

The STM is initializing. After approximately 2 minutes, when the STM 
has completed its initialization, the Test LED turns off. If the Test LED 
remains on, the initialization has failed.

Off

The system has completed its initialization successfully. The Test LED 
should be off during normal operation.

Blinking (Amber)

The STM is shutting down.

Software is being updated.

A hot fix is being installed.

One of the three licenses has expired. To stop the Test LED from 
blinking, renew the license, or click the 

Stop LED Blinking

 button on 

the System Status screen (see 

“Viewing System Status” on page 6-19

).

Uplink (WAN) Port

Left LED

Off

The WAN port has no physical link, that is, no Ethernet cable is plugged 
into the STM.

On (Green)

The WAN port has a valid connection with a device that provides an 
Internet connection.

Blink (Green)

Data is being transmitted or received by the WAN port.

Right LED

Off

The WAN port is operating at 10 Mbps.

On (Green)

The WAN port is operating at 100 Mbps.

On (Amber)

The WAN port is operating at 1000 Mbps.

Downlink (LAN) Ports

Left LED

Off

The LAN port has no link.

On (Green)

The LAN port has detected a link with a connected Ethernet device.

Blink (Green)

Data is being transmitted or received by the LAN port.

Right LED

Off

The LAN port is operating at 10 Mbps.

On (Amber)

The LAN port is operating at 100 Mbps.

On (Green)

The LAN port is operating at 1000 Mbps.

Table 1-2.  LED Descriptions for the STM150 (continued)

Object

Activity

Description

DRAFT

Содержание STM150 - ProSecure Web And Email Threat Management Appliance

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды