NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance, Справочник по аппаратуре

Страница: 57 / 248

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Using the Setup Wizard to Provision the STM in Your Network 2-23
v1.0, September 2009
Setup Wizard Step 8 of 11: HTTP Proxy Settings
Enter the settings as explained in Table 2-7 on page 2-23 , then click Next to go the following
screen.
Figure 2-17
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the security subscription update settings by selecting Global Settings > HTTP
Proxy . For more information about these settings, see “Configuring the HTTP
Proxy Settings” on page 3-7 .
Table 2-7. Setup Wizard Step 8: HTTP Proxy Settings
Setting Description (or Subfield and Description)
HTTPS Proxy Settings
Use a Proxy Server to
Connect to the Internet If computers on the network connect to the Internet via a proxy server, select
the
Use a Proxy Server to Connect to the Internet checkbox to specify and
enable a proxy server. Enter the following settings:
Proxy Server The IP address and port number of the proxy server.
User Name The user name that is used for the proxy server authentication.
Password The password that is used for the proxy server authentication.
DRAFT