https://E5700SG_Controller_IP:8443
Related concepts
Port bond modes for E5700SG controller ports
When configuring network links for the E5700SG controller ports, you can use port bonding for
the 10/25-GbE ports that connect to the Grid Network and optional Client Network, and the 1-GbE
management ports that connect to the optional Admin Network. Port bonding helps protect your
data by providing redundant paths between StorageGRID networks and the appliance.
Setting the IP configuration
You use the StorageGRID Appliance Installer to configure the IP addresses and routing
information used for the appliance Storage Node on the StorageGRID Grid, Admin, and Client
Networks.
About this task
You must either assign a static IP for the appliance on each connected network or assign a
permanent lease for the address on the DHCP server.
If you want to change the link configuration, see the instructions for changing the link
configuration of the E5700SG controller.
Steps
1.
In the StorageGRID Appliance Installer, select Configure Networking > IP Configuration.
The IP Configuration page appears.
2.
To configure the Grid Network, select either Static or DHCP in the Grid Network section of
the page.
Hardware Installation and Maintenance Guide for SG5700 Appliances
38
Configuring the hardware
