NEC SV8500, Руководство по эксплуатации и обслуживанию

Страница: 499 / 975

– 452 –
CHAPTER 3 System Messages
The following provides the fault information by using the combination of data (FNC, INF, and FLT).
Definition of Fault Information
FNC
( )
INF ( ) FLT ( ) Data of
-
Description
01/02 01 01 None Ether cable not connected
02 Failed to initialize Ether Controller
03 Failed to reset Ether Controller
04 Failed after 16 attempts to transmit,
due to collisions
05 Lost carrier during transmission
06 Collision has occurred after the slot
time of the channel has elapsed
07 CRC error on the incoming frame
08 Received Descriptor is not available
09 Received Buffer error
0A Transmit Buffer error
0B Exceeds allowed transmission limit
0C FIFO overflow
02 01 Transmit Timer time out
02
Receives over-length message
03
Transmit Buffer overflow
03 01 - : Destination IP Address
, :
Faulty Port No. (Origination)
, : Faulty Port No. (Destination)
Time-to-live expired on packet
02
Bad header checksum in packet
03
Received bad format packet
04
Failed to frame received pack-
ets
05
Cannot fragment packet
3
4 5 6 28
6 9
10 11
12 13