NEC SV8500, Руководство по эксплуатации и обслуживанию

Страница: 222 / 975

– 175 –
CHAPTER 2 Operations of SV8500 Server
Table 2-2 Detailed Information of Reset Factors
Major
Item
(Hex)
Factors
Sub Factors
DtermIP (Proprietary Protocol) DtermIP (SIP)/Soft Phone (SIP)
00 Not used - -
01
Aut
onom
ou
s Reset
before registra-
tion/
before DRS01
(Initial Setting
Request) During “
DHCP Connecting....
”
indication, the terminal was placed in
configuration mode and Save or cancel
was performed.
Failure before registration such as fail-
ure while acquiring DHCP address,
DHCP server connection timeout
02 during registra-
tion/before DRS
03 (Signaling
Path Set
Response) During “
DRS Connecting...
.”
indication, the terminal was placed in
configuration mode and Save or cancel
was performed.
Failure during registration such as
response wait timeover, receiving
abnormal response
03 after registration/
during initializa-
tion - Failure immediately after registration
completion such as 200 OK Receive
timeout for initial SUBSCRIBE and no
reception of initial SUBSCRIBE from
the server
04 during call pro-
cess Reset occurred because of timeout
while waiting to receive TIR PAW. Not used
05 during partial ini-
tialization - Not used
06 diagnosis com-
mand not
received/Keep-
alive NG Reset occurred after “Network Busy” Response wait timeover for SUB-
SCRIBE or NOTIFY/SUBSCRIBE is
expired.
07 Software Reset Request Reset was requested by the system/
Reset occurred after receiving All
ClearPAW direction. Reset was requested by the server.
08 DHCP lease is expired Reset occurred after DHCP Lease
Expiration. DHCP Lease Expiration or NACK
Reception
09 Configuration mode is
ended
(DtermIP only) After placing in Configuration Mode
from clock indication, save or cancel
was performed in the mode. Configuration menu is ended.
0A Reset Request by PROTI-
MIS (DtermIP only) Terminal reset was requested by PCPro
commands such as AKYD, ADKS or
MBST. Not used
0B - Not used - -