NEC EXPRESS5800/100 SERIES N8100-1635F, Руководство пользователя

Страница: 14 / 152

1-2 Notes on Using Your Modular Server
SAFETY NOTES
This section provides notes on using the modular server safely. Read this section carefully to ensure
proper and safe use of the modular server. For symbols, see "SAFETY INDICATIONS" provided
earlier.
WARNING
Do not use the modular server for services where critical high availability may
directly affect human lives.
The modular server is not intended to be used with or control facilities or
devices concerning human lives, including medical devices, nuclear facilities
and devices, aeronautics and space devices, transportation facilities and
devices; and facilities and devices requiring high reliability. NEC assumes no
liability for any accident resulting in personal injury, death, or property
damage if the modular server has been used in the above conditions.
Do not disassemble, repair, or alter the modular server.
Never attempt to disassemble, repair, or alter the modular server on any
occasion other than described in this User's Guide. Failure to follow this
instruction may cause an electric shock or fire as well as malfunctions of the
modular server.
Do not remove the battery.
Your modular server contains the lithium and NiMH (or Li-Ion) batteries.
(Optional devices also contain various batteries.)
Do not remove the battery. Placing the battery close to a fire or in the water
may cause an explosion.
When the modular server does not operate appropriately due to the dead
batteries, contact your service representative. Do not disassemble the
modular server to replace or recharge the battery by yourself.
Do not use the modular server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the system and
disconnect the power plug from the outlet, then contact your service
representative. Using the modular server in such conditions may cause a fire.
Keep needles or metal objects away from the modular server.
Do not insert needles or metal objects into ventilation holes in the modular
server. Doing so may cause an electric shock.
Use the devices only in the specified areas.
Modular servers should be installed in the dedicated Module Enclosure for
their uses. Do not install the modular servers in a chassis other than the
Module Enclosure. Failure to follow it may result in fire and/or electric shock to
occur.