Motorola WiNG 5.7.1, Справочное руководство системы

Страница: 939 / 1090

13 - 123
13.3.23 Network
Access Point Statistics
Use the Network screen to view information for performance statistics for ARP, DHCP, Routing and Bridging.For more
information, refer to the following:
• ARP Entries
• Route Entries
• Default Routes
• Bridge
• IGMP
• MLD
• DHCP Options
• Cisco Discovery Protocol
• Link Layer Discovery Protocol
• IPv6 Neighbor
• MSTP
13.3.23.1 ARP Entries
Network
Address Resolution Protocol (ARP) is a protocol for mapping an IP address to a device address recognized in the local network.
An address is 32 bits long. In an Ethernet local area network, however, addresses for attached devices are 48 bits long. (The
physical machine address is also known as a MAC address.) A table, usually called the ARP cache, is used to maintain a
correlation between each MAC address and its corresponding IP address. ARP provides the protocol rules for making this
correlation and providing address conversion in both directions.
To view an access point’s ARP statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
connected access points.
3. Select Network and expand the menu to reveal its submenu items.
4. Select ARP Entries .