manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 744

11 - 6 WiNG 5.7.1 Access Point System Reference Guide 

11.2 Crash Files

Diagnostics

Use Crash Files to assess critical access point failures and malfunctions.

Use crash files

 

to troubleshoot issues specific to the device on which a crash event was generated. These are issues impacting 

the core (distribution layer). Once reviewed, files can be deleted or transferred for archive. Crash files can be sent to a support 
team to expedite issues with the reporting device.

To review crash files impacting the access point network: 

1. Select 

Diagnostics.

2. Select 

Crash Files.

The crash files screen displays a list of device MAC addresses impacted by core dumps.

3. Select a device from those displayed in the lower, left-hand, side of the UI. 

Figure 11-4

Crash Files screen

The screen displays the following for each reported crash file:

4. Select a listed crash file and select the 

Copy 

button to display a screen used to copy (archive) the file to an external 

location.

5. To remove a listed crash file from those displayed, select the file and select the 

Delete 

button.

File Name

Displays the name of the file generated when a crash event occurred. This is the file 
available to copy to an external location for archive and administration.

Size

Lists the size of the crash file, as this information is often needed when copying files to a 
location external to the access point. 

Last Modified

Displays the time stamp of the crash file’s most recent update.

Actions

Displays the action taken by the access point in direct response to the detected crash 
event.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды