manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 305

5 - 221

5.4.5.2 Adoption Overrides

Device Overrides

Use the 

Adoption

 screen to define the configuration of a preferred Virtual Controller, wireless controller, or service platform 

resource used for access point adoption. A Virtual Controller can adopt up to 24 access points of the same model. The Virtual 
Controller must also share its VLAN to peer access points wishing to adopt to it. The Virtual Controllers IP address (or 
hostname), pool and routing level must also be defined and made available to connecting peers.

Adoption is the process an access point uses to discover Virtual Controllers available in the network, pick the most desirable 
Virtual Controller, establish an association, obtain its configuration and consider itself provisioned.

At adoption, an access point solicits and receives adoption responses from Virtual Controllers available on the network. 

To define an access point’s Virtual Controller configuration or apply an override to an existing parameter:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

 from the Configuration tab.

3. Select 

Device Overrides

.

4. Select a target device from the device browser

 

in the lower, left-hand, side of the UI. 

5. Select 

Device Overrides

 from the Device menu to expand it into sub menu options.

6. Select 

Adoption

.

A screen displays where an access point’s Virtual Controller group, VLAN and network address information can be defined 
or overridden for the preferred Virtual Controller resource.

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the 

Basic Configuration

 screen’s 

Device Overrides

 field and select 

Clear Overrides

. This will remove all overrides 

from the device.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды