manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 511

6 - 41

7. Select 

Enable RADIUS Accounting

 to use an external RADIUS resource for AAA accounting. When the radio button is 

selected, a 

AAA Policy

 field displays. Either use the default AAA policy with the WLAN, or select 

Create

 to define a new 

AAA configuration that can be applied to the WLAN. This setting is disabled by default.

8. Select 

OK

 when completed to update this WLAN’s accounting settings. Select 

Reset 

to revert the screen back to its last 

saved configuration.

Accounting Deployment Considerations

Before defining a AAA configuration on a WLAN, refer to the following deployment guidelines to ensure the configuration is 
optimally effective:

• When using RADIUS authentication, it is recommended that the WAN port round trip delay not exceed 150 ms. Excessive 

delay over a WAN can cause authentication and roaming issues. When excessive delays exist, a distributed RADIUS service 
should be used.

• It is recommended that authorization policies be implemented when users need to be restricted to specific WLANs, or time 

and date restrictions need to be applied.

• Authorization policies can also apply bandwidth restrictions and assign Firewall policies to users and devices.

6.2.4 Configuring WLAN Service Monitoring Settings

Wireless LANs

Service Monitoring

 is a mechanism for administrating external AAA server, captive portal server, access point adoption, and 

DHCP server activity for WLANs. Service monitoring enables an administrator to better notify users of a service’s availability 
and make resource substitutions. Service monitoring can be enabled and applied to log activity as needed for specific WLANs.

External services can be rendered unavailable due to any of the following instances:

• When the RADIUS authentication server becomes unavailable. The RADIUS server could be local or external to the 

controller, service platform or access point.

• When an externally hosted captive portal is unavailable (for any reason)

• If an access point’s connected controller or service platform becomes unavailable.

• When a monitored DHCP server becomes unavailable.

To configure Service Monitoring settings:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Wireless.

3. Select 

Wireless LANs

 to display a high level display of existing WLANs.

4. Select the

 Add

 button to create an additional WLAN, or 

Edit

 to modify the properties of an existing WLAN.

5. Select 

Service Monitoring

.

Case

Use the drop-down menu to specify whether the MAC address format supplied is 
specified in 

upper

 or 

lower

 case. The default setting is upper case.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды