Motorola WiNG 5.7.1, Справочное руководство системы

Страница: 263 / 1090

5 - 179
Figure 5-119 Mesh Point Auto Channel Selection Path Method Root Path Metric screen
13. Refer to the following for more information on the Path Method Root Path Metric screen. These descriptions apply to both
the 2.4 GHz and 5.0/4.9 GHz frequencies.
Channel Width Configure the channel width that mesh point automatic channel scan should assign to the
selected radio. The available options are:
• Automatic – Indicates the channel width is calculated automatically. This is the
default value.
• 20 MHz – Indicates the width between two adjacent channels is 20 MHz.
• 40 MHz – Indicates the width between two adjacent channels is 40 MHz.
• 80 MHz – Indicates the width between tow adjacent channels is 80 MHz. This is only
available on access points that support 802.11ac.
Priority Meshpoint Configure the mesh point monitored for automatic channel scan. This is the mesh point
given priority over other available mesh points. When configured, a mesh is created with
this mesh point. When not configured, a mesh point is automatically selected.
Meshpoint: Path
Minimum Configure the minimum path metric value for a mesh connection to be established. Set a
value between 100 - 20,000.