manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 517

6 - 47

6. Refer to the

 Advanced RADIUS Configuration

 field to set the WLAN’s NAS configuration and RADIUS Dynamic 

Authorization.

7. Refer to the 

Radio Rates

 field to define selected data rates for both the 2.4 GHz and 5.0 GHz bands.

Figure 6-23

Advanced WLAN - Rate Settings 2.4 GHz-WLAN screen

8. For 2.4 GHz WLAN radio transmission rate settings, define the minimum 

Basic

 and 

Supported 

rates in the 

802.11b Rates

, 

802.11g Rates

 and 

802.11n Rates 

sections. These rates are applicable to client traffic associated with this WLAN only.

If supporting 802.11n, select a Supported MCS index. Set a MCS (modulation and coding scheme) in respect to the radio’s 
channel width and guard interval. A MCS defines (based on RF channel conditions) an optimal combination of 8 data rates, 
bonded channels, multiple spatial streams, different guard intervals and modulation types. Clients can associate as long as 
they support basic MCS (as well as non-11n basic rates).

NAS Identifier

Specify what is included in the RADIUS NAS-Identifier field for authentication and 
accounting packets. This is an optional setting, and defaults are used if no values are 
provided.

NAS Port

The profile database on the RADIUS server consists of user profiles for each connected 

network access server

 (NAS) port. Each profile is matched to a user name representing a 

physical port. When the access point authorizes users, it queries the user profile database 
using a user name representative of the physical NAS port making the connection.

RADIUS Dynamic 
Authorization

Select this check box to enable the RADIUS protocol to support unsolicited messages sent 
from the RADIUS server. These messages allow administrators to issue

 change of 

authorization

 (CoA) messages, which affect session authorization, or 

Disconnect Message 

(DM), which cause a session to terminate immediately. This option is disabled by default.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды