manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 139

5 - 55

Figure 5-35

Access Point Radio - Advanced Settings tab

22. Refer to the 

Aggregate MAC Protocol Data Unit (A-MPDU)

 field to define how MAC service frames are aggregated by 

the access point radio.

23. Use the 

Aggregate MAC Service Data Unit (A-MSDU) 

drop-down menu to set the supported A-MSDU mode.

24. Available modes include 

Receive Only

 and 

Transmit and Receive

. 

Transmit and Receive

 is the default value. Using Transmit 

and Receive, frames up to 4 KB can be sent and received. The buffer limit is not configurable.

25. Use the 

Airtime Fairness 

fields to configure wireless access to devices based on their usage.

Select 

Enable Fair Access

 to enable this feature. Select 

Prefer High Throughput Clients

 to prefer clients with higher 

throughput (802.11n clients) over clients with slower throughput (802.11 a/b/g) clients. Use the spinner control to set a 
weight for the higher throughput clients.

A-MPDU Modes

Use the drop-down menu to define the A-MPDU mode supported. Options include 

Transmit Only

, 

Receive Only

, 

Transmit and Receive

 and 

None

. The default value is 

Transmit and Receive. Using the default value, long frames can be both sent and received 
(up to 64 KB). When enabled, define either a transmit or receive limit (or both).

Minimum Gap Between 
Frames

Use the drop-down menu to define the minimum gap between A-MPDU frames (in 
microseconds). The default value is 

auto 

which indicates that the minimum gap between 

frames is selected automatically. The other values are 

0, 1, 2, 4, 8 

and 

16

.

Received Frame Size 
Limit

If a support mode is enable allowing A-MPDU frames to be received, define an advertised 
maximum limit for received A-MPDU aggregated frames. Options include 8191, 16383, 
32767 or 65535 bytes. The default value is 65535 bytes.

Transmit Frame Size 
Limit

Use the spinner control to set limit on transmitted A-MPDU aggregated frames. The 
available range is from 2000 - 65,535 bytes). The default value is 65535 bytes.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды