manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 345

5 - 261

Select 

Enable Fair Access

 to enable this feature. Select 

Prefer High Throughput Clients

 to prefer clients with higher 

throughput (802.11n clients) over clients with slower throughput (802.11 a/b/g) clients. Use the spinner control to set a 
weight for the higher throughput clients.

25. Set or override the following profile 

Aeroscout

 Properties for the selected access point radio.

26. Set or override the following profile 

Ekahau Properties

 for the selected access point radio.

27. Define a 

Reduced Interframe Spacing

 (RIFS) mode using the drop-down menu. This value determines whether interframe 

spacing is applied to transmissions or received packets, or both or none. The default mode is 

Transmit and Receive

.

Consider setting this value to 

None

 for high priority traffic to reduce packet delay.

28. Set or override the following 

Non-Unicast Traffic

 values for the profile’s supported access point radio and its connected 

wireless clients: 

29. Refer to the 

Sniffer Redirect (Packet Capture)

 field to define or override the radio’s captured packet configuration.

30. Select the 

Enable Off-Channel Scan 

radio button to scan across other channels in the radio band. This setting is disabled 

by default.

31. Select the 

Off-Channel Scan list for 5GHz

 field and enter the channels on which off channel scan has to be performed 

for the 5.0 GHz radio. Similarly select the channels for the 

Off Channel Scan list for 2.4 GHz 

radio.

32. Use the 

Max Multicast

 spinner to set the maximum number of multicast channels on which to do off channel scan.

33. Use the 

Scan Interval

 spinner to set the time duration in DTIM period between 2 off channel scans.

34. Use the 

Sniffer Redirect

 field to provide the IP address of the device to which the captured off-channel scan packets are 

redirected to.

35. Select

 OK

 to save or override the changes to the Advanced Settings screen. Select

 Reset

 to revert to the last saved 

configuration.

Forward

Select to enable forwarding of Aeroscout packets

MAC to be forwarded

Enter the MAC address that is incorporated in the Aeroscout packets that are forwarded.

Forwarding host

Provide the IP address of the host to which Ekahau packets are forwarded to.

Forwarding Port

Use the spinner to provide the Ekahau forwarding port number.

MAC to be forwarded

Enter the MAC address that is incorporated in the Ekahau packets that are forwarded.

Non-Unicast Transmit 
Rate

Use the

 Select 

drop-down menu to launch a sub screen to define the data rate broadcast 

and multicast frames are transmitted. Seven different rates are available if the not using 
the same rate for each BSSID, each with a separate menu.

Non-Unicast Forwarding

Define whether client broadcast and multicast packets should always follow DTIM, or 
only follow DTIM when using Power Save Aware mode. The default setting is Follow 
DTIM.

Host for Redirected 
Packets

If packets are re-directed from a access point radio, define an IP address of a resource 
(additional host system) used to capture the re- directed packets. This address is the 
numerical (non DNS) address of the host used to capture the re-directed packets.

Channel to Capture 
Packets

Use the drop-down menu to specify the channel used to capture re-directed packets. The 
default value is channel 1.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды