manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 299

5 - 215

7. Refer to the 

SMART Scan

 field to review the settings defined for SMART RF. Optionally assign/remove overrides to and 

from specific parameters.

8. Refer to the 

Client Name

 table to view the clients connected to RF Domain member access points adopted by networked 

controllers or service platforms. Use the table to associate administrator assigned client names to specific connected client 
MAC addresses for improved client management.

Enter the client’s factory coded MAC address in the 

MAC Address

 field. Assign a name to the RF Domain member access 

point’s connected client to assist in its easy recognition in the 

Name

 field.

9. Select 

OK

 to save the changes and overrides made to the RF Domain configuration. Selecting 

Reset

 reverts the screen to 

its last saved configuration.

5.4.4 Wired 802.1X Overrides

Overriding a Device Configuration

802.1X provides administrators secure, identity based access control as another data protection option to utilize with a device 
profile. 

802.1X is an IEEE standard for media-level (Layer 2) access control, offering the capability to permit or deny network 
connectivity based on the identity of the user or device.

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

.

3. Select 

Device Overrides 

from the options on left-hand side of the UI.

4. Select a target device from the device browser

 

in the lower, left-hand, side of the UI.

5. Select 

Wired 802.1x

.

Figure 5-142

Profile Wired 802.1X screen

Enable Dynamic Channel

Select this option to enable dynamic channel scan.

2.4 GHz Channels

Use the 

Select

 drop-down menu to select channels to scan in the 2.4 GHz band. Selected 

channels are highlighted with a grey background. Unselected channels are highlighted 
with a white background. Multiple channels can be selected at the same time.

5.0 GHz Channels

Use the 

Select

 drop-down menu to select channels to scan in the 5.0 GHz band. Selected 

channels are highlighted with a grey background. Unselected channels are highlighted 
with a white background. Multiple channels can be selected at the same time.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды