manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 696

9 - 28 WiNG 5.7.1 Access Point System Reference Guide 

Refer to the following for more information on the discovery rules.

7. Select 

OK

 to save the updates to this Bonjour Discovery Policy. Select 

Reset

 to revert to the last saved configuration.

9.4.2 Configuring the Bonjour Forwarding Policy

Setting the Bonjour Gateway Configuration

Bonjour Forwarding Policy enables discovery of services on VLANs which are not visible to the device running the Bonjour 
Gateway. Bonjour forwarding enables forwarding of Bonjour advertisements across VLANs to enable the Bonjour Gateway 
device to build a list of services and the VLANs where these services are available.

To display Bonjour Discovery Policy information:

1. Select 

Configuration

.

2. Select 

Services

.

3. Select 

Bonjour Gateway

 to expand its submenu.

4. Select 

Forwarding Policy

.

Service Name

Configures the service that can be discovered by the Bonjour Gateway.

•

Predefined

 – Use the drop-down menu to select from a list of predefined Apple 

services. 

•

Alias

 – Use an existing alias to define a service that is not available in the predefined 

list.

VLAN Type

Use the drop-down menu to select the VLAN type.

•

local

 – Indicates that the VLAN(s) defined in 

Service VLAN

 field is local in nature.

• tunneled – Indicates that the VLAN(s) defined in Service VLAN field are tunneled.

Service VLANs

Provide a VLAN or a list of VLANs on which the selected service is discoverable.

NOTE: 

Only one (1) Bonjour Forwarding Policy can be configured.

NOTE: 

There must be Layer 2 connectivity between the devices for forwarding to work.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды