manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 248

5 - 164 WiNG 5.7.1 Access Point System Reference Guide 

Figure 5-109

Critical Resources screen - Adding a Critical Resource

6. Use the 

Offline Resource Detection 

drop-down menu to define how critical resource event messages are generated. 

Options include 

Any

 and

 All

. If selecting Any, an event is generated when the state of any single critical resource changes. 

If selecting All, an event is generated when the state of all monitored critical resources change.

7. Use the 

Monitoring Criteria

 drop-down menu to define the way critical resource is monitored. When critical resource is 

configured on individual devices, each configured device keeps monitoring the availability of the configured critical device. 
This increases the amount of network traffic in that RF-Domain. This feature is used to restrict the amount of traffic being 
generated when monitoring critical resources. If selecting 

All

, all the devices that are configured to monitor critical resource 

continue to do so individually. However, when 

rf-domain-manager

 or 

cluster-master

 is selected, only the device designated 

as the rf-domain-manager or the cluster-master monitors the critical resource. The state of the critical resource is then 
updated to all the devices in the rf-domain or to those managed by the cluster-master if the 

Sync Adoptees

 option is 

enabled.

8. Use the 

Sync Adoptees

 option to enable the rf-domain-manager or cluster-master to indicate to the other devices in the 

rf-domain / cluster that the state of a monitored critical resource has changed. Select to enable this feature.

9. Use the 

Use Flows

 option to enable this device to monitor critical resources using firewall flows.

10. Select the 

IP 

option (within the 

Monitor Via 

field at the top of the screen) to monitor a critical resource directly (within 

the same subnet) using the provided critical resource IP address as a network identifier.

11. Select the 

Interface 

option (within the

 Monitor Via

 field at the top of the screen) to monitor a critical resource using either 

the critical resource’s VLAN, WWAN1 or PPPoE1 interface. If VLAN is selected, a spinner control is enabled to define the 
destination VLAN ID used as the interface for the critical resource.

12. Select 

+ Add Row

 to define the following for critical resource configurations:

IP Address

Provide the IP address of the critical resource. This is the address used by the access point to ensure 
the critical resource is available. Up to four addresses can be defined.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды